Product Sections

Main Pages

What equipment will I need?

For an RO based system

Below is a typical check list for a Home based RO system including every fitting and fastener.

AT HOME

1000 ltr storage tank - 2nd hand

Reverse Osmosis Unit (R.O. Unit)

Submersible Pump (pump water from tank to car)

10 Mtr delivery hose

Delivery hose shut-off valve

2x large jubilee type clips

IN VEHICLE FOR RUNNING 1 POLE (items needed extra for two poles in brackets)

250 ltr tank or other size

Tank elbow

60 psi pump (pump water from tank to pole feed - 100psi required if feeding 2 poles with 100mtr hoses)

2 pumps barbs to link hose to pump

10 mtrs 1/2 inch re-inforced hose

(1/2 inch T piece)

3x medium jubilee type clips (+ 3 )

1x Hozelock endstops (+1)

To wire the pump in the car you will need:

10 amp switch

Electrical wire

Many have taken a permanent live feed from one of the rear courtesy lights.

FROM VEHICLE TO POLE

Hose Reel (2 in use if running two poles at once)

100 mtr Microbore hose (or 2x100 mtr and 100psi pump )

Inline bore adapter (x2)

1 small jubilee type clips (x2)

1 medium jubilee type clips (x2)

1x Crimp O ring (x2)

EZ Endstop (x2)

ProtectaBall (x2)

POLES

Your choice of poles

Flow control valve pack for each pole

The above list is only intended as a guide and we do not currently stock delivery pumps or smaller RO units.

For a RESIN BEAD SYSTEM
Below is a typical check list for each system including every fitting and fastener.

IN VEHICLE FOR RUNNING 1 POLE (items needed extra for two poles in brackets)

125 ltr tank or other size

Tank Elbow

1x Composite resin bead canister

1x 25L bag of resin bead

1x TDS (Total disolved solids) Meter